|
|
Phono Box II |
MM/MC Phono Pre-amplifier
|
Good sound from sound technology
- Phono MM/MC selection switch located at the rear of the unit
- Metal case shields the electronics from vibrational and electromagnetic interference
- Small size allows installation close to record player
- Special low-noise ICs used
- Optimal channel separation through dual-mono circuitry
- Gold plated RCA connection sockets
- Outboard power supply included
- Available in black and silver
|
|
| Technical data |
Pro-Ject Phono Box II |
| Input impedance, MM |
47kohms/120pF |
| Input impedance, MC |
100ohms/120pF |
| Gain, MM |
40dB |
| Output voltage typically |
300mV/1kHz at 3mV/1kHz (MM input) |
| Gain, MC |
60dB |
| Output voltage typically |
300mV/1kHz at 0,3mV/1kHz (MC input) |
| Max. output |
9,5V (1kHz) |
| Noise floor, MM |
86dB (94dB - A weighted) |
| Noise floor, MC |
68dB (75dB - A weighted) |
| THD, MM |
<0,01% |
| THD, MC |
<0,05% |
| RIAA-equalisation curve accuracy |
20Hz - 20kHz / max. 0,5dB |
| Power supply type |
Mains-fed outboard power supply |
| Output voltage |
16V/200mA AC |
| Power consumption |
16V/30mA AC |
| Dimension W x H x D |
103 x 38 x 115mm |
| Weight |
570g without power supply |
|
|
