|
|
Perspective II |
Manual turntable with fitted cartridge and Pro-Ject Speed Box supplied |
Good sound from sound technology
- Sub-chassis decouples platter and tonearm
- Resonant frequency of the sub-chassis adjustable
- Tonearm bearing comprises inverted hardened stainless tips in ABEC7 spec ballraces
- Headshell and conical armtube formed from a single carbon fibre workpiece
- Armtube allows adjustment of needle azimuth despite fixed headshell
- Vertical tracing angle adjustable
- Platter with perimeter belt drive, vinyl playing surface and record clamp
- Low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing
- Two electrically and mechanically optimised motor units for 33,3 and 45 r.p.m. speeds
Features
- Pro-Ject 9cc tonearm
- Nominal speeds 33 / 45 / 78 r.p.m. (78 optional)
- Separate motor for 33 / 45 and 78 r.p.m. (78 motor optional)
- Record clamp
- Gold-plated RCA phono sockets
- Dust cover
- Transparent acrylic plinth
|
|
| Technical Data |
Pro-Ject Perspective II |
| Nominal speeds |
33 / 45 / 78 r.p.m. (* 78 optional) |
| Separate motor for |
33 / 45 and * 78 r.p.m. |
| Dust cover |
yes |
| Sub-chassis |
yes |
| Record clamp |
yes |
| RCA phono sockets |
yes |
| Tonearm |
Pro-Ject 9cc |
| Carbon-fibre headshell and armtube |
yes |
| Tonearm with ABEC7 spec ballraces |
yes |
| Effective tonearm length |
9 " (230mm) |
| Effective tonearm mass |
8,5g |
| Overhang |
18mm |
| Supplied counterweights |
cartridge weight 6 - 10g
cartridge weight 11 - 15g |
| Optional counterweight |
cartridge weight 8 - 11g |
| Downforce range |
10 - 35mN |
| Speed variance |
?0,5 % |
| Wow and flutter |
?0,08 % |
| Signal to noise |
-70dB |
| Platter weight/diameter |
2,6kg/300mm |
| Power supply type |
Mains-fed outboard power supply
220 - 240V, 50 cycles or 100 - 110V, 60 cycles |
| Output voltage |
16V/500mA AC |
| Power consumption |
2W |
| Dimensions (lid open) |
460 x 420 x 465mm |
| Dimensions (lid closed) |
460 x 160 x 365mm |
| Weight |
9,4kg |
|
|
